Softing FiberXpert OTDR 5000
Tier 2 OTDR testing for multimode and singlemode fibre networks.
Professional Tier 2 OTDR for multimode and singlemode fibre certification, fault location, event analysis and troubleshooting.
What is Softing FiberXpert OTDR 5000 and when should you use it?
Softing FiberXpert OTDR 5000 is an OTDR used for Tier 2 fibre testing, trace analysis, event location and fault finding on multimode and singlemode fibre. Unlike an OLTS, which measures end-to-end loss, an OTDR shows where events such as connectors, splices, bends and breaks occur along the fibre. It is used for commissioning, troubleshooting and advanced fibre analysis.
Product Gallery
Key Features
Tier 2 OTDR certification; Multimode testing at 850/1300 nm; Singlemode testing at 1310/1550 nm; Smart Link Mapper simplified event display; Automatic PASS/FAIL analysis; Automatic macrobend detection; Graphical OTDR traces and event tables; Integrated attenuation measurement; Optional USB fibre microscope support; Short event detection zone below 80 cm.
Applications
Tier 2 fibre certification; Fibre fault location; Enterprise and data centre fibre testing; Installation acceptance; Maintenance and troubleshooting; Multimode and singlemode link analysis.
Standards
Automatic PASS/FAIL evaluation according to applicable TIA/IEC requirements supported by the instrument.
Technical Specifications
Wavelengths: 850/1300 nm multimode and 1310/1550 nm singlemode; Event detection zone: <80 cm; Up to 128,000 data points; Interchangeable optical connectors available including FC, SC, DIN, LC and ST.
Variants / Configurations
Single FiberXpert OTDR 5000 platform supporting multimode and singlemode fibre. Launch leads, inspection microscope and accessories can be specified separately.
Training Available
Fibre Optics Training UK can provide practical training around Softing FiberXpert OTDR 5000, including launch and receive fibres, wavelength selection, dead zones, event tables, bidirectional testing concepts, trace interpretation, fault finding and reporting. Training is designed to help engineers understand not only which buttons to press, but what the result means, when the test method is appropriate and when a different verification, qualification or certification tool is required.
Manufacturer-neutral training using leading industry equipment
Fibre Optics Training UK uses equipment from multiple leading manufacturers, including Fluke Networks, Softing, EXFO, VIAVI, Fujikura and INNO. Our training is manufacturer-neutral and standards-led: learners are taught the underlying test method, correct setup, result interpretation and practical workflow so they can work confidently across different platforms rather than being trained around one brand.
Downloads & Resources
Download official Softing product literature, datasheets, manuals and quick reference material for the FiberXpert OTDR 5000.
FAQs
What is Softing FiberXpert OTDR 5000 used for?
Softing FiberXpert OTDR 5000 is an OTDR used for Tier 2 fibre testing, trace analysis, event location and fault finding on multimode and singlemode fibre. Unlike an OLTS, which measures end-to-end loss, an OTDR shows where events such as connectors, splices, bends and breaks occur along the fibre. It is used for commissioning, troubleshooting and advanced fibre analysis.
What is the difference between verification, qualification and certification?
Verification checks basic wiring and continuity. Qualification proves whether a link can support a target network application or data rate. Certification measures the parameters required by cabling standards and produces a formal PASS/FAIL result.
How do I know whether this is the right tester for my job?
Choose the instrument based on the evidence the project requires: basic wiremap or continuity, live-network troubleshooting, Ethernet performance qualification, standards-based copper certification, Tier 1 optical loss testing or Tier 2 OTDR analysis.
How does Softing compare with Fluke Networks, TREND Networks and NetAlly?
The brands overlap in several categories but organise their portfolios differently. The right choice depends on whether you need verification, qualification, certification, fibre loss testing, OTDR analysis, PoE diagnostics or live-network troubleshooting. Compare required test standards, speeds, media, reporting workflow and support rather than brand name alone.
Can Fibre Optics Training UK help compare test equipment before purchase?
Yes. We can help identify the test method and equipment category that matches the installation standard, client requirement, network speed and reporting obligation.
Is practical training available?
Yes. Practical training is available on relevant test methods and equipment workflows, including setup, test selection, result interpretation, fault finding and reporting.
Do I need a certifier if I already have a network tester?
Not always. A network tester may be ideal for commissioning and troubleshooting, but if the contract requires standards-based cable certification you need an appropriate certifier capable of producing the required PASS/FAIL evidence.
What should I compare besides the purchase price?
Compare test scope, supported standards and speeds, copper/fibre capability, PoE support, accessories, calibration requirements, reporting software, workflow, warranty/support and the training needed to use the instrument correctly.
What is the difference between Tier 1 and Tier 2 fibre testing?
Tier 1 verifies end-to-end optical loss, length and polarity as required by the test method. Tier 2 uses an OTDR to locate and characterise individual events along the fibre. Inspection should be carried out before connection and test work.
Softing FiberXpert OTDR 5000
Softing IT Networks
Fibre Testing